GEPRC CineLog35 V2 HD O3 FPV Drone (PNP)
$619.99
Price: $619.99
(as of Apr 07, 2025 09:41:23 UTC – Details)
Specifications
Model: Cinelog35 V2 HD O3
Frame: GEP-CL35 V2
Wheelbase: 142mm
Gimbal plate: 2.0mm
Top plate: 3.5mm
Bottom plate: 1.5mm
FC system:GEP-F722-45A AIO V2
MCU: STM32F722RET6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 45A
VTX: O3 Air Unit
Camera: O3
Antenna: 5.8G&2.4G
Motor: SPEEDX2 2105.5-2150KV（6S）
Propeller: HQProp D-T90MM
CineLog35 V2 HD O3 TBSNanoRX weight: 285.8g
Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
Recommended battery: LiPo 1050mah-1300mah
Flight time: 5′00″ -8′ 30″
Includes
1 x Cinelog35 V2 HD O3
2 x HQProp D-T90MM（2 pairs）
2x M20*250mm battery strap
2 x Battery Silicone Pads
1 x Set of screws
1 x L-shaped screwdriver (1.5mm)
1 x L-shaped screwdriver (2mm)
1 x L-shaped screwdriver (3mm)
1 x M5 wrench
1 x plastic tweezers
1 x Antenna fixed tube (pair)
1 x Keychain
1 x GoPro Mounting Base
1 x Naked GoPro Mounting Base
1 x Antenna Mounting Base
Screw package includes:
2x cup head screws M2*18
2x round head screws with pad M2*5.5
1x round head screws M2*12
2x Rivet nut M2
4x round head screws M2*8
4x round head screws M2*7
4x round head screws M2*6
2x round head screws M2.5*6
2x hexagonal screw M1.6*8
1x Flange nuts M5
2x Press Rivet Nuts_Brass color M2*1.9-OD4.9
2x Iron nut M2
2x Iron nut M2
2x Camera gimbal shock absorbing rubber
New appearance design, strengthening carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, silent,Adopts the GEP F722-45A AIO V2 high performance flight controller,Propeller Guard adds memory card and USB ports to O3 Air Unit for easy data reading.
CineLog35 v2 version integrated with O3 VTX. The CineLog35 V2 version of the main carbon plate and injection protection frame increased the 7075 aluminum column for structural strengthening.
The battery mounting method uses a tie with 7075 aluminum parts fixed. The power XT60E1-M plug is integrated with the carbon plate for convenient application. The protective frame for O3 Air Unit adds a memory card and USB port for easy data reading.
Equipped with F722-45A AIO and the new SPEEDX2 2105.5 motor, more power, with aggressive power system and faster response.
This is a 3.5-inch HD FPV cinematic FPV drone that integrates cinematic, freestyle, leisure, and safety to meet the user’s requirements for flying and filming various scenes indoors and outdoors. The user’s satisfied voice is the motivation for us to move forward.
Amazon Customer –
Great FPV drone!
Perfect drone for flying acro along with a full size GoPro Hero 10/11/12. I’ve been flying 6S 1550mah with a full size gopro and getting 5-6 minutes. Motors stay pretty cool too.Note, this drone is not for beginners if you’re just starting out with acro (manual) flying. This purchase includes the drone only. No controller and no LiPo batteries.
m.th –
misleading and deceptive marketing tactic to sale
merchant is deceptive in its marketing of this quadcopter. you need to buy special remotes and special antenna kit for this. its very specific in which remote and antennas you need. you can try to use the regular ones..but you have to do all kinds of customization and programming which may not work and damage those remotes and antennas and even the quad when trying to configure them to work together. this is NOT TRUE plug and play. i think a lot chinese sellers confuse what plug and play means. with all parts..your talking over $1000 to this flying… good luck ..go luck somewhere else. and this does NOT fly and smooth as 5 inch or even 7 inch. very jittery and needs alot alot alot of tuning which can be nightmare to program the software just right.THERE ARE NO INSTRUCTIONS TO HAVE IT SET FOR A DEFAULT PROGRAM OR WHATNOT …VERY POOR INSTRUCTIONS INCLUDED.CHINESE MFRS ARE KNOWN FOR POOR CONSUMER INSTRUCTIONS. STAY AWAY FROM POORLY DOCUMENETED PRODUCTS. THEY JUST WANT TO MAKE MONEY REGARDLESS IF ITS QUALITY OR NOT.
TheBisonAndTheBird –
This drone rocks!
Flies so great! Just make sure your props are on correct since it’s a pusher drone. Caries my gropro11 like a champ!
Figment –
Solder blob shorted out on first power-up bad quality control
No visual testing was done after final assembly by GEPRC or whoever assembled this quadcopter. Upon first power up via USB to check settings using Betaflight configurator a blob of solder shorted out the flight controller AND MY USB HUB! Pissed off as I use the hub to power my keyboard, mouse, a LED desk ligh and my headphones.Thanks for the crappy build Geprc